Understanding Key Differences Between FTP, FTPS and SFTP

Perhaps the most common protocols used in file transfer today are FTP, FTPS and SFTP.  While the acronyms for these protocols are similar,  there are some key differences among them, in particular how data are exchanged, the level of security provided and firewall considerations.  Learning these key differences can help you when choosing a file transfer protocol or troubleshooting common connection issues.
FTP

The FTP (File Transfer Protocol) protocol has been around for quite some time.  It was first proposed in RFC 114 over 40 years ago and eventually evolved into RFC 959 which is the standard that FTP clients and servers follow today.

Data Exchange

The FTP protocol exchanges data using two separate channels known as the command channel and data channel.

The command channel typically runs on server port 21 and is responsible for accepting client connections and handling the exchange of simple commands between an FTP client and server.  The USER and PASS commands used for authenticating an FTP user are examples of commands that are exchanged on the command channel.  The command channel remains open until the client sends the QUIT command to disconnect, or the server forcibly disconnects the client due to inactivity or other reason.

The data channel, runs using on-demand temporary ports listening on the server (passive mode) or on the client (active mode) and is responsible for exchanging data in the form of directory listings and file transfers.  The LIST, STOR and RETR commands used for getting a server directory listing, uploading a file and downloading a file are examples of commands (sent using the command channel) that open a data channel.  Unlike the command channel which remains open during the entire FTP session, the data channel is closed once the transfer of data is complete.   In order to handle concurrent file transfers or directory listings a range of data channel ports must be used.

Security

Using FTP both the command and data channels are unencrypted.  Any data sent over these channels can be intercepted and read.

Firewall

Server -  Allow inbound connections on port 21.  Define passive port range (e.g. 2000-2500) for file transfers and directory listings and allow inbound connections on passive port range.  Consult your server documentation for instructions on how to set a passive port range.

Client - Allow outbound connections to port 21 and passive port range defined by server.
FTPS

When the FTP protocol was initially drafted security was not a concern.  Since then many things have changed and sending data over any public network without encryption is considered very risky and in some cases prohibited.  In order to address this issue a set of security extensions to the original FTP protocol were proposed in RFC 2228 that protect FTP data as it travels over the network using SSL encryption.

Data Exchange

See FTP

Security

Secure variants of FTP include FTPS Implicit SSL and FTPS Explicit SSL.  Both utilize SSL encryption.

FTPS Implicit SSL

In implicit SSL mode a required SSL session is established between client and server before any data is exchanged.  As it's name suggests, the use of SSL is implied and any connection attempt made by a client without using SSL are refused by the server.  FTPS implicit SSL services generally run on port 990.   Although still in use today, FTPS Implicit SSL is considered by many to be obsolete in favor of FTPS Explicit SSL.

FTPS Explicit SSL

In explicit SSL mode the client and server negotiate the level of protection used.  This is very useful in that the server can support both unencrypted FTP and encrypted FTPS sessions on a single port.  In an explicit SSL session the client first establishes an unencrypted connection to the FTP service.  Prior to sending user credentials, the client requests that the server switch the command channel to an SSL encrypted channel by sending the AUTH TLS or AUTH SSL command.  Upon successful setup of the SSL channel the client then sends user credentials to the FTP server.  These credentials along with any other commands sent to server during the FTP session are automatically encrypted by the SSL channel.  Similar to the way in which the command channel may be protected, the level of protection used on the data channel is negotiated between the client and server using the PROT command.

Firewall

Server -  Allow inbound connections on port 21 and / or 990.  Define passive port range (e.g. 2000-2500) for file transfers and directory listings and allow inbound connections on passive port range.  Consult your server documentation for instructions on how to set a passive port range.

Client - Allow outbound connections to port 21 and passive port range defined by server.
SFTP

SFTP is often confused with FTPS and vice-versa even though these protocols share nothing in common except their ability to securely transfer files.   SFTP is actually based on the SSH (Secure Shell) protocol which is best known for it's use in providing secure access to shell accounts on remote servers.

Data Exchange

Unlike FTP/S, SFTP does not utilize separate command and data channels.  Both data and commands are transferred in specially formatted packets via a single connection.

Security

All data sent between client and server is encrypted using an agreed upon encryption cipher.

Firewall

Server - Allow inbound connections on port 22.

Client - Allow outbound connections to port 22.
Share files via FTP, SFTP, or FTPS

JSCAPE MFT Server allows you to share files via FTP, SFTP, FTPS, and other file transfer protocols. This Managed File Transfer server runs on all popular platforms (including Windows, Linux, Unix, AIX, Solaris, and Mac OS/X) and now supports OpenID and SAML Single Sign On. Download a free evaluation edition now.

please refer to http://www.jscape.com/blog/bid/75602/Understanding-Key-Differences-Between-FTP-FTPS-and-SFTP